Comments on: Mux Shield http://mayhewlabs.com Creative Tools Sun, 22 Aug 2010 20:23:30 +0000 hourly 1 http://wordpress.org/?v=3.0 By: Mark http://mayhewlabs.com/arduino-mux-shield/comment-page-1#comment-18 Mark Sun, 22 Aug 2010 20:23:30 +0000 http://mayhewlabs.com/?page_id=184#comment-18 Luk - It is possible by using the same method I talked about above. Just extend the idea and use some jumpers! Luk – It is possible by using the same method I talked about above. Just extend the idea and use some jumpers!

]]> By: luk http://mayhewlabs.com/arduino-mux-shield/comment-page-1#comment-15 luk Sun, 22 Aug 2010 00:47:38 +0000 http://mayhewlabs.com/?page_id=184#comment-15 hey, do u know if its possible to stick three shields on a arduino mega? bye luk hey,
do u know if its possible to stick three shields on a arduino mega?
bye
luk

]]> By: luk http://mayhewlabs.com/arduino-mux-shield/comment-page-1#comment-14 luk Fri, 20 Aug 2010 21:59:06 +0000 http://mayhewlabs.com/?page_id=184#comment-14 thanks man! thanks man!

]]> By: Mark http://mayhewlabs.com/arduino-mux-shield/comment-page-1#comment-13 Mark Fri, 20 Aug 2010 14:59:48 +0000 http://mayhewlabs.com/?page_id=184#comment-13 Jasper - It is possible with some modifications. You can do it by cutting the long leads to analog pins 0-2 on the top shield and putting short jumpers from analog pins 0-2 to analog pins 3-5 (all on the top shield). This will solve the conflict of having too many signals to analog pins 0-2. The select lines on the digital side will have no problem going to two shields. In the example code, just add 3 more muxArrays to store the data and 3 more loops with analog reads on pins 3,4, and 5. I hope this helps you out! Jasper – It is possible with some modifications. You can do it by cutting the long leads to analog pins 0-2 on the top shield and putting short jumpers from analog pins 0-2 to analog pins 3-5 (all on the top shield). This will solve the conflict of having too many signals to analog pins 0-2. The select lines on the digital side will have no problem going to two shields. In the example code, just add 3 more muxArrays to store the data and 3 more loops with analog reads on pins 3,4, and 5.

I hope this helps you out!

]]> By: Jaspar http://mayhewlabs.com/arduino-mux-shield/comment-page-1#comment-12 Jaspar Fri, 20 Aug 2010 04:50:59 +0000 http://mayhewlabs.com/?page_id=184#comment-12 Hi, Is it possible to stack two of these onto the one Arduino 328 board? Cheers, Jaspar Hi,

Is it possible to stack two of these onto the one Arduino 328 board?

Cheers,
Jaspar

]]>