Arduino Mega 16bit shield and ethernet shield conflicting.

Home › Forums › Extended ADC Shield Support › Arduino Mega 16bit shield and ethernet shield conflicting.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • January 21, 2016 at 3:30 pm #1384
    hardac
    Participant

    Awesome board this ltc1859.
    I am using ethernet udp on the ethernet shield and they work fine alone but together the ethernet shield reports the wrong IP and wrong port.
    The 16 bit adc board apparently works ok
    Without the ethernet shield the 16 bit adc reports different voltages than with the ethernet connected.
    At this point I didnt test with voltage sources connected but reporting different voltages may raise a red flag too.

    Gentlemen! Any ideas?

    Thanks

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.