Help on the Extended ADC shield LTC1859

Home › Forums › Extended ADC Shield Support › Help on the Extended ADC shield LTC1859

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 10, 2016 at 5:19 pm #2330
    jlizhg
    Participant

    Hi,

    I just bought a extended ADC shield LTC1859, can anyone tell me where to download the programming package including the sample for this card? Thanks a lot.

    November 10, 2016 at 5:43 pm #2331
    jlizhg
    Participant

    Hi, I found the library for the card, however, the read is wrong. For any input the output is always something like:
    2.58431 0.00000 0.00000 2.58248 2.58400 -0.00031

    I am using a LTC1859 on a Arduino Mega.

    Can anyone help me on this? Thanks a lot.

    November 10, 2016 at 5:46 pm #2332
    jlizhg
    Participant

    Hi, I found the library for the card, however, the read is wrong.

    For any input the output is always something like:
    2.58431 0.00000 0.00000 2.58248 2.58400 -0.00031

    I am using a LTC1859 on a Arduino Mega. I am running ExtendedADCShieldDemo.ino, the results are similar to those of Kishore posted on January 1, 2016.

    Can anyone help me on this? Thanks a lot.

    November 10, 2016 at 5:52 pm #2333
    jlizhg
    Participant

    Never mind, I think I found the problem, it is working now.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.